Subscribe via RSS
11Jun/150

6029 to Wagga Wagga

That beast of an engine from Canberra was on the move again, this time southbound. It was the June Queen's Birthday long weekend and they were running a 'Winter Safari' tour to Junee and Wagga Wagga.

I wanted to check it out, but didn't feel like covering the 100s of kilometres there and back driving; so I chose to take the trusty XPT once again. The Friday night service would get me to Junee just before 0100 hours. This was ok as I'd arranged with the motel across from the station to stash my room key somewhere accessible. All went well and I slept for the arrival of the train the next morning.

DSC06677 DSC06696 DSC06703
DSC06683 DSC06684 DSC06687 DSC06691 DSC06694

The overland arrived just before our train departed. It was busy shunting the auto-rail off the rear and over to it's dock to put the cars back onto the road. The trip into the night was peaceful enough, although it seemed that getting drunk and walking up and down the corridors all night was to be a good hobby for some locals.

Saturday Morning

I'd inspected the ARTC timetables and put together the following diagram. There wasn't too much freight in the area, but there was enough to keep one's self entertained. I had initially thought that the steam engine shuttles were from Wagga to Junee and back, but it turned out that (once I actually read the website correctly) that the shuttles were just between Wagga and Bomen. It seems that quite a few others, who came looking for the engine on the platform at Junee during the day, made the same mistake.

		Coota	Junee	Bomen	Wagga
ST22	CLK	0137	0048	0033	0022
6MB4	PN	0329	0221	0158	0150
6MB7	QN	0539	0405	0340	0332
5BM7	PN	0354	0441	0522	0528
9L03	ARHS	0449	0543	----	----
3PW4	PN	0903	0757	0727	0719
9S05	ARHS	----	0805	0830	0840
9L06	ARHS	----	----	0915	0855
9S07	ARHS	----	----	0920	0940
9337N	PN	0852	0944	----	----
9L08	ARHS	----	----	1015	0955
6WP2	PN	0900	0952	1021	1028
9S09	ARHS	----	----	1030	1050
9L10	ARHS	----	----	1125	1105
9S11	ARHS	----	----	1130	1150
3314N	QUBE	----	1159	----	----
9L12	ARHS	----	----	1225	1205
9S13	ARHS	----	----	1230	1250
SP41	CLK	1219	1258	----	----	
3315N	QUBE	----	1300	----	----
ST23	CLK	1251	1327	1346	1354

I'd bought my return ticket from Junee and had considered trying to change it to depart from Wagga instead. Unfortunately there weren't too may transportation options to get to Wagga, so I stayed put in Junee to watch the festivities. In hindsight, I could have actually purchased a ticket on 6029 and travelled south to Wagga in the morning when they left... but meh, I'd no idea.

6029 arrives with assistance

4501 and 4403 lead 6029 into Junee around an hour late. Still under the cover of darkness, the consist made its way into the yard and then detached. All three engines came off the consist to allow 6029 to shunt off and proceed up to the roundhouse. As with most typical gunzels, there were ramblings of mechanical failure and other doom/gloom. I would've assumed that 6029 would've lead into Junee, but then again... it was pitch black and there was no need for spectacle. They would've also needed to keep up with traffic, so having the diesels do all the work makes sense.

DSC06709 DSC06715 DSC06717
DSC06719 DSC06720 DSC06722

The engine stayed in the roundhouse for quite a while... missing the initial slot it was meant to take from Junee to Wagga.

DSC06735 DSC06800 DSC06832

A northbound freight was then given the path and 6029 covered it in steam/smoke as it came through.

DSC06868 DSC06872 DSC06888 DSC06891 DSC06894
DSC06902 DSC06908 DSC06913 DSC06916 DSC06919

Once the path was clear, the consist was shunted into the station and passengers boarded.

DSC06923 DSC06931 DSC06932 DSC06935 DSC06937
DSC06938 DSC06948 DSC06951

It then proceeded off to Wagga, looking great, but requiring quite a bit of help from 4501 on the tail as it climbed the grade out of Junee.

DSC06954 DSC06956 DSC06958
DSC06962 DSC06965 DSC06967

That was it for 6029... the next site was from the window of our southboard daylight XPT. One of its shuttles was to Uranquinty and it was in the loop there as we bolted through.

Freight around Junee

There's always containers stored in the yard... Qube shunt here from Harefield. It seems that they can't fit their entire consists into the roads at Harefield, so they shunt rakes of container trains back and forth to load and unload. They then bring the portions together in Junee yard and take them south to Melbourne.

DSC06975 DSC06977 DSC06978 DSC06991 DSC06992

Junee is also the location of the triangle to Griffith. I lie though, it's no longer a triangle. The branch is only accessible when heading north from the south, so any southbound train wanting to go to Griffith has to head into Junee Yard, run around and then proceed back out again. A grain train did this whilst I was waiting at the station.

DSC07004 DSC07006 DSC07008

DSC07029 DSC07030 DSC07031 DSC07032 DSC07033
DSC07036 DSC07040 DSC07042
DSC07044 DSC07045 DSC07049

A random Aurizon track vehicle then appeared at the crossing, mounted the tracks and then bolted off north.

DSC07016DSC07017 DSC07034

Finally the Qube service from Harefield arrived to drop off one rake of containers and take another off to load/unload.

DSC07050 DSC07083 DSC07085

Railmotor Societies 721/621

The radar then showed that an unusual vehicle was headed south. Speaking to folks on the platform, it turns out that the Patterson Railmotor Society was running a tour over the long weekend also.

DSC07099 DSC07100 DSC07108

XPT shennanigans

Only one platform is in use at Junee. Whether it be for lack of accessibility, patronage or care, the second platform that would cater to northbound passengers is out of use. This means that, on approach, the northbound XPT needs to cross over to the southbound tracks to reach platform 1. Of course, it can only do this is the road is clear. Funnily enough, the road isn't often clear as the southbound XPT usually crossed the northbound here. It's the half-way point between Melbourne and Sydney.

DSC07129 DSC07133 DSC07139

DSC07143 DSC07148 DSC07151

Due to the track arrangement, the northbound XPT is, more often than not, sent north past the station into the siding north of the level crossing. The southbound XPT then comes through, visits platform 1 and then proceeds to Melbourne. Once clear, the northbound XPT then reverses (well, it's got a cab at either end, so it's not too much hassle) onto the southbound road and accesses the platform. Once loaded it then continues north on its journey.

Quite a lot of mucking around when they could just reinstate the other platform. It's the age-old issue with Australian trains and 'customer' service. They've slapped it in the too-hard basket and it's frustrating to watch the infrastructure crumble.