Comments on: Amiga 1200: Installing AmigaOS 3.9 https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9 Trains, computers, vintage, retro, model railways... the lot... Tue, 05 May 2020 04:46:08 +0000 hourly 1 https://wordpress.org/?v=6.4.3 By: Formatting an IDE Drive for use in an Amiga 500 « modelrail.otenko https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9/comment-page-1#comment-45219 Tue, 05 May 2020 04:46:08 +0000 http://modelrail.otenko.com/?p=4800#comment-45219 […] Amiga 1200: Installing AmigaOS 3.9 […]

]]>
By: Turbointel https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9/comment-page-1#comment-39520 Fri, 22 Dec 2017 16:24:29 +0000 http://modelrail.otenko.com/?p=4800#comment-39520 In reply to stevenh.

thanks think it maybe my iso

]]>
By: stevenh https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9/comment-page-1#comment-39491 Mon, 18 Dec 2017 04:07:49 +0000 http://modelrail.otenko.com/?p=4800#comment-39491 In reply to Turbointel.

Given time over the holidays, I’ll follow the instructions above and see what’s happening.

]]>
By: Turbointel https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9/comment-page-1#comment-39482 Sun, 17 Dec 2017 11:41:10 +0000 http://modelrail.otenko.com/?p=4800#comment-39482 ive followed this guide to the letter but when installing os3.9 after accepting the license conditions the installer locks up what am i doing wrong

]]>
By: Jarl Wijman https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9/comment-page-1#comment-33153 Thu, 20 Oct 2016 09:33:13 +0000 http://modelrail.otenko.com/?p=4800#comment-33153 In reply to stevenh.

i followed your guide exactly, i have the exact same kickstart 3.1 40.069 rom file
same settings, same adf install disks and the addons you listed

everything installs without errors, if i stop right before the Workbench 3.9 install, everything is fine, boots within seconds to the workbench screen, showing OS partition and RAM drive

that’s on both winuae and amiga itself

after installing 3.9, in winuae it boots as shown in your pictures
but when booting the same ssd from the amiga, i only have an empty “workbench screen”, no workbench, no OS or RAM Disk icons, no menu

havent made any changes to startup-sequence or userstartup
no boing balls installed yet either

]]>
By: stevenh https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9/comment-page-1#comment-33141 Wed, 19 Oct 2016 22:23:01 +0000 http://modelrail.otenko.com/?p=4800#comment-33141 In reply to Jarl Wijman.

This usually means that there’s an issue in your StartupSequence or UserStartup.
Use the information here: http://wiki.amigaos.net/wiki/AmigaOS_Manual:_Early_Startup

You’ll then be able to adjust boot options.

What ROMs do you have installed and what OS are you trying to run?

]]>
By: Jarl Wijman https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9/comment-page-1#comment-33139 Wed, 19 Oct 2016 18:39:07 +0000 http://modelrail.otenko.com/?p=4800#comment-33139 excellent writeup, but…

folowed this guide, using a ssd instead of a cf card
ssd boots just fine under winuae, but if i put the drive in the amiga, it shows an empty workbench screen, no ram disk or OS harddisk

Amiga 1200 with ACA1233n accelerator with 128mb ram, 32gb kingspec ssd
no other mods

any idea what could be wrong?

]]>
By: Steve https://modelrail.otenko.com/c64amiga/amiga-1200-installing-amigaos-3-9/comment-page-1#comment-31627 Mon, 27 Jun 2016 01:47:54 +0000 http://modelrail.otenko.com/?p=4800#comment-31627 Awesome ! Easy to follow with great pictures! Thanks Maestro!

]]>